--- /dev/null
+/* This file is taken from http://www.genealogy.org/~scottlee/
+ Only this initial comment has been added. The next comment
+ gives the original copyright notice.
+*/
+
+
+/* $selId: jewish.c,v 2.0 1995/10/24 01:13:06 lees Exp $
+ * Copyright 1993-1995, Scott E. Lee, all rights reserved.
+ * Permission granted to use, copy, modify, distribute and sell so long as
+ * the above copyright and this permission statement are retained in all
+ * copies. THERE IS NO WARRANTY - USE AT YOUR OWN RISK.
+ */
+
+/**************************************************************************
+ *
+ * These are the externally visible components of this file:
+ *
+ * void
+ * SdnToJewish(
+ * long int sdn,
+ * int *pYear,
+ * int *pMonth,
+ * int *pDay);
+ *
+ * Convert a SDN to a Jewish calendar date. If the input SDN is before the
+ * first day of year 1, the three output values will all be set to zero,
+ * otherwise *pYear will be > 0; *pMonth will be in the range 1 to 13
+ * inclusive; *pDay will be in the range 1 to 30 inclusive. Note that Adar
+ * II is assigned the month number 7 and Elul is always 13.
+ *
+ * long int
+ * JewishToSdn(
+ * int year,
+ * int month,
+ * int day);
+ *
+ * Convert a Jewish calendar date to a SDN. Zero is returned when the
+ * input date is detected as invalid or out of the supported range. The
+ * return value will be > 0 for all valid, supported dates, but there are
+ * some invalid dates that will return a positive value. To verify that a
+ * date is valid, convert it to SDN and then back and compare with the
+ * original.
+ *
+ * char *JewishMonthName[14];
+ *
+ * Convert a Jewish month number (1 to 13) to the name of the Jewish month
+ * (null terminated). An index of zero will return a zero length string.
+ *
+ * VALID RANGE
+ *
+ * Although this software can handle dates all the way back to the year
+ * 1 (3761 B.C.), such use may not be meaningful.
+ *
+ * The Jewish calendar has been in use for several thousand years, but
+ * in the early days there was no formula to determine the start of a
+ * month. A new month was started when the new moon was first
+ * observed.
+ *
+ * It is not clear when the current rule based calendar replaced the
+ * observation based calendar. According to the book "Jewish Calendar
+ * Mystery Dispelled" by George Zinberg, the patriarch Hillel II
+ * published these rules in 358 A.D. But, according to The
+ * Encyclopedia Judaica, Hillel II may have only published the 19 year
+ * rule for determining the occurrence of leap years.
+ *
+ * I have yet to find a specific date when the current set of rules
+ * were known to be in use.
+ *
+ * CALENDAR OVERVIEW
+ *
+ * The Jewish calendar is based on lunar as well as solar cycles. A
+ * month always starts on or near a new moon and has either 29 or 30
+ * days (a lunar cycle is about 29 1/2 days). Twelve of these
+ * alternating 29-30 day months gives a year of 354 days, which is
+ * about 11 1/4 days short of a solar year.
+ *
+ * Since a month is defined to be a lunar cycle (new moon to new moon),
+ * this 11 1/4 day difference cannot be overcome by adding days to a
+ * month as with the Gregorian calendar, so an entire month is
+ * periodically added to the year, making some years 13 months long.
+ *
+ * For astronomical as well as ceremonial reasons, the start of a new
+ * year may be delayed until a day or two after the new moon causing
+ * years to vary in length. Leap years can be from 383 to 385 days and
+ * common years can be from 353 to 355 days. These are the months of
+ * the year and their possible lengths:
+ *
+ * COMMON YEAR LEAP YEAR
+ * 1 Tishri 30 30 30 30 30 30
+ * 2 Heshvan 29 29 30 29 29 30 (variable)
+ * 3 Kislev 29 30 30 29 30 30 (variable)
+ * 4 Tevet 29 29 29 29 29 29
+ * 5 Shevat 30 30 30 30 30 30
+ * 6 Adar I 29 29 29 30 30 30 (variable)
+ * 7 Adar II -- -- -- 29 29 29 (optional)
+ * 8 Nisan 30 30 30 30 30 30
+ * 9 Iyyar 29 29 29 29 29 29
+ * 10 Sivan 30 30 30 30 30 30
+ * 11 Tammuz 29 29 29 29 29 29
+ * 12 Av 30 30 30 30 30 30
+ * 13 Elul 29 29 29 29 29 29
+ * --- --- --- --- --- ---
+ * 353 354 355 383 384 385
+ *
+ * Note that the month names and other words that appear in this file
+ * have multiple possible spellings in the Roman character set. I have
+ * chosen to use the spellings found in the Encyclopedia Judaica.
+ *
+ * Adar II, the month added for leap years, is sometimes referred to as
+ * the 13th month, but I have chosen to assign it the number 7 to keep
+ * the months in chronological order. This may not be consistent with
+ * other numbering schemes.
+ *
+ * Leap years occur in a fixed pattern of 19 years called the metonic
+ * cycle. The 3rd, 6th, 8th, 11th, 14th, 17th and 19th years of this
+ * cycle are leap years. The first metonic cycle starts with Jewish
+ * year 1, or 3761/60 B.C. This is believed to be the year of
+ * creation.
+ *
+ * To construct the calendar for a year, you must first find the length
+ * of the year by determining the first day of the year (Tishri 1, or
+ * Rosh Ha-Shanah) and the first day of the following year. This
+ * selects one of the six possible month length configurations listed
+ * above.
+ *
+ * Finding the first day of the year is the most difficult part.
+ * Finding the date and time of the new moon (or molad) is the first
+ * step. For this purpose, the lunar cycle is assumed to be 29 days 12
+ * hours and 793 halakim. A halakim is 1/1080th of an hour or 3 1/3
+ * seconds. (This assumed value is only about 1/2 second less than the
+ * value used by modern astronomers -- not bad for a number that was
+ * determined so long ago.) The first molad of year 1 occurred on
+ * Sunday at 11:20:11 P.M. This would actually be Monday, because the
+ * Jewish day is considered to begin at sunset.
+ *
+ * Since sunset varies, the day is assumed to begin at 6:00 P.M. for
+ * calendar calculation purposes. So, the first molad was 5 hours 793
+ * halakim after the start of Tishri 1, 0001 (which was Monday
+ * September 7, 4761 B.C. by the Gregorian calendar). All subsequent
+ * molads can be calculated from this starting point by adding the
+ * length of a lunar cycle.
+ *
+ * Once the molad that starts a year is determined the actual start of
+ * the year (Tishri 1) can be determined. Tishri 1 will be the day of
+ * the molad unless it is delayed by one of the following four rules
+ * (called dehiyyot). Each rule can delay the start of the year by one
+ * day, and since rule #1 can combine with one of the other rules, it
+ * can be delayed as much as two days.
+ *
+ * 1. Tishri 1 must never be Sunday, Wednesday or Friday. (This
+ * is largely to prevent certain holidays from occurring on the
+ * day before or after the Sabbath.)
+ *
+ * 2. If the molad occurs on or after noon, Tishri 1 must be
+ * delayed.
+ *
+ * 3. If it is a common (not leap) year and the molad occurs on
+ * Tuesday at or after 3:11:20 A.M., Tishri 1 must be delayed.
+ *
+ * 4. If it is the year following a leap year and the molad occurs
+ * on Monday at or after 9:32:43 and 1/3 sec, Tishri 1 must be
+ * delayed.
+ *
+ * GLOSSARY
+ *
+ * dehiyyot The set of 4 rules that determine when the new year
+ * starts relative to the molad.
+ *
+ * halakim 1/1080th of an hour or 3 1/3 seconds.
+ *
+ * lunar cycle The period of time between mean conjunctions of the
+ * sun and moon (new moon to new moon). This is
+ * assumed to be 29 days 12 hours and 793 halakim for
+ * calendar purposes.
+ *
+ * metonic cycle A 19 year cycle which determines which years are
+ * leap years and which are common years. The 3rd,
+ * 6th, 8th, 11th, 14th, 17th and 19th years of this
+ * cycle are leap years.
+ *
+ * molad The date and time of the mean conjunction of the
+ * sun and moon (new moon). This is the approximate
+ * beginning of a month.
+ *
+ * Rosh Ha-Shanah The first day of the Jewish year (Tishri 1).
+ *
+ * Tishri The first month of the Jewish year.
+ *
+ * ALGORITHMS
+ *
+ * SERIAL DAY NUMBER TO JEWISH DATE
+ *
+ * The simplest approach would be to use the rules stated above to find
+ * the molad of Tishri before and after the given day number. Then use
+ * the molads to find Tishri 1 of the current and following years.
+ * From this the length of the year can be determined and thus the
+ * length of each month. But this method is used as a last resort.
+ *
+ * The first 59 days of the year are the same regardless of the length
+ * of the year. As a result, only the day number of the start of the
+ * year is required.
+ *
+ * Similarly, the last 6 months do not change from year to year. And
+ * since it can be determined whether the year is a leap year by simple
+ * division, the lengths of Adar I and II can be easily calculated. In
+ * fact, all dates after the 3rd month are consistent from year to year
+ * (once it is known whether it is a leap year).
+ *
+ * This means that if the given day number falls in the 3rd month or on
+ * the 30th day of the 2nd month the length of the year must be found,
+ * but in no other case.
+ *
+ * So, the approach used is to take the given day number and round it
+ * to the closest molad of Tishri (first new moon of the year). The
+ * rounding is not really to the *closest* molad, but is such that if
+ * the day number is before the middle of the 3rd month the molad at
+ * the start of the year is found, otherwise the molad at the end of
+ * the year is found.
+ *
+ * Only if the day number is actually found to be in the ambiguous
+ * period of 29 to 31 days is the other molad calculated.
+ *
+ * JEWISH DATE TO SERIAL DAY NUMBER
+ *
+ * The year number is used to find which 19 year metonic cycle contains
+ * the date and which year within the cycle (this is a division and
+ * modulus). This also determines whether it is a leap year.
+ *
+ * If the month is 1 or 2, the calculation is simple addition to the
+ * first of the year.
+ *
+ * If the month is 8 (Nisan) or greater, the calculation is simple
+ * subtraction from beginning of the following year.
+ *
+ * If the month is 4 to 7, it is considered whether it is a leap year
+ * and then simple subtraction from the beginning of the following year
+ * is used.
+ *
+ * Only if it is the 3rd month is both the start and end of the year
+ * required.
+ *
+ * TESTING
+ *
+ * This algorithm has been tested in two ways. First, 510 dates from a
+ * table in "Jewish Calendar Mystery Dispelled" were calculated and
+ * compared to the table. Second, the calculation algorithm described
+ * in "Jewish Calendar Mystery Dispelled" was coded and used to verify
+ * all dates from the year 1 (3761 B.C.) to the year 13760 (10000
+ * A.D.).
+ *
+ * The source code of the verification program is included in this
+ * package.
+ *
+ * REFERENCES
+ *
+ * The Encyclopedia Judaica, the entry for "Calendar"
+ *
+ * The Jewish Encyclopedia
+ *
+ * Jewish Calendar Mystery Dispelled by George Zinberg, Vantage Press,
+ * 1963
+ *
+ * The Comprehensive Hebrew Calendar by Arthur Spier, Behrman House
+ *
+ * The Book of Calendars [note that this work contains many typos]
+ *
+ **************************************************************************/
+
+#include "sdncal.h"
+
+#define HALAKIM_PER_HOUR 1080
+#define HALAKIM_PER_DAY 25920
+#define HALAKIM_PER_LUNAR_CYCLE ((29 * HALAKIM_PER_DAY) + 13753)
+#define HALAKIM_PER_METONIC_CYCLE (HALAKIM_PER_LUNAR_CYCLE * (12 * 19 + 7))
+
+#define SDN_OFFSET 347997
+#define NEW_MOON_OF_CREATION 31524
+
+#define SUNDAY 0
+#define MONDAY 1
+#define TUESDAY 2
+#define WEDNESDAY 3
+#define THURSDAY 4
+#define FRIDAY 5
+#define SATURDAY 6
+
+#define NOON (18 * HALAKIM_PER_HOUR)
+#define AM3_11_20 ((9 * HALAKIM_PER_HOUR) + 204)
+#define AM9_32_43 ((15 * HALAKIM_PER_HOUR) + 589)
+
+static int monthsPerYear[19] = {
+ 12, 12, 13, 12, 12, 13, 12, 13, 12, 12, 13, 12, 12, 13, 12, 12, 13, 12, 13
+};
+
+static int yearOffset[19] = {
+ 0, 12, 24, 37, 49, 61, 74, 86, 99, 111, 123,
+ 136, 148, 160, 173, 185, 197, 210, 222
+};
+
+char *JewishMonthName[14] = {
+ "",
+ "Tishri",
+ "Heshvan",
+ "Kislev",
+ "Tevet",
+ "Shevat",
+ "AdarI",
+ "AdarII",
+ "Nisan",
+ "Iyyar",
+ "Sivan",
+ "Tammuz",
+ "Av",
+ "Elul"
+};
+
+/************************************************************************
+ * Given the year within the 19 year metonic cycle and the time of a molad
+ * (new moon) which starts that year, this routine will calculate what day
+ * will be the actual start of the year (Tishri 1 or Rosh Ha-Shanah). This
+ * first day of the year will be the day of the molad unless one of 4 rules
+ * (called dehiyyot) delays it. These 4 rules can delay the start of the
+ * year by as much as 2 days.
+ */
+static long int
+Tishri1(
+ int metonicYear,
+ long int moladDay,
+ long int moladHalakim)
+{
+ long int tishri1;
+ int dow;
+ int leapYear;
+ int lastWasLeapYear;
+
+ tishri1 = moladDay;
+ dow = tishri1 % 7;
+ leapYear = metonicYear == 2 || metonicYear == 5 || metonicYear == 7
+ || metonicYear == 10 || metonicYear == 13 || metonicYear == 16
+ || metonicYear == 18;
+ lastWasLeapYear = metonicYear == 3 || metonicYear == 6
+ || metonicYear == 8 || metonicYear == 11 || metonicYear == 14
+ || metonicYear == 17 || metonicYear == 0;
+
+ /* Apply rules 2, 3 and 4. */
+ if ((moladHalakim >= NOON) ||
+ ((!leapYear) && dow == TUESDAY && moladHalakim >= AM3_11_20) ||
+ (lastWasLeapYear && dow == MONDAY && moladHalakim >= AM9_32_43))
+ {
+ tishri1++;
+ dow++;
+ if (dow == 7) {
+ dow = 0;
+ }
+ }
+
+ /* Apply rule 1 after the others because it can cause an additional
+ * delay of one day. */
+ if (dow == WEDNESDAY || dow == FRIDAY || dow == SUNDAY) {
+ tishri1++;
+ }
+
+ return(tishri1);
+}
+
+/************************************************************************
+ * Given a metonic cycle number, calculate the date and time of the molad
+ * (new moon) that starts that cycle. Since the length of a metonic cycle
+ * is a constant, this is a simple calculation, except that it requires an
+ * intermediate value which is bigger that 32 bits. Because this
+ * intermediate value only needs 36 to 37 bits and the other numbers are
+ * constants, the process has been reduced to just a few steps.
+ */
+static void
+MoladOfMetonicCycle(
+ int metonicCycle,
+ long int *pMoladDay,
+ long int *pMoladHalakim)
+{
+ register unsigned long int r1, r2, d1, d2;
+
+ /* Start with the time of the first molad after creation. */
+ r1 = NEW_MOON_OF_CREATION;
+
+ /* Calculate metonicCycle * HALAKIM_PER_METONIC_CYCLE. The upper 32
+ * bits of the result will be in r2 and the lower 16 bits will be
+ * in r1. */
+ r1 += metonicCycle * (HALAKIM_PER_METONIC_CYCLE & 0xFFFF);
+ r2 = r1 >> 16;
+ r2 += metonicCycle * ((HALAKIM_PER_METONIC_CYCLE >> 16) & 0xFFFF);
+
+ /* Calculate r2r1 / HALAKIM_PER_DAY. The remainder will be in r1, the
+ * upper 16 bits of the quotient will be in d2 and the lower 16 bits
+ * will be in d1. */
+ d2 = r2 / HALAKIM_PER_DAY;
+ r2 -= d2 * HALAKIM_PER_DAY;
+ r1 = (r2 << 16) | (r1 & 0xFFFF);
+ d1 = r1 / HALAKIM_PER_DAY;
+ r1 -= d1 * HALAKIM_PER_DAY;
+
+ *pMoladDay = (d2 << 16) | d1;
+ *pMoladHalakim = r1;
+}
+
+/************************************************************************
+ * Given a day number, find the molad of Tishri (the new moon at the start
+ * of a year) which is closest to that day number. It's not really the
+ * *closest* molad that we want here. If the input day is in the first two
+ * months, we want the molad at the start of the year. If the input day is
+ * in the fourth to last months, we want the molad at the end of the year.
+ * If the input day is in the third month, it doesn't matter which molad is
+ * returned, because both will be required. This type of "rounding" allows
+ * us to avoid calculating the length of the year in most cases.
+ */
+static void
+FindTishriMolad(
+ long int inputDay,
+ int *pMetonicCycle,
+ int *pMetonicYear,
+ long int *pMoladDay,
+ long int *pMoladHalakim)
+{
+ long int moladDay;
+ long int moladHalakim;
+ int metonicCycle;
+ int metonicYear;
+
+ /* Estimate the metonic cycle number. Note that this may be an under
+ * estimate because there are 6939.6896 days in a metonic cycle not
+ * 6940, but it will never be an over estimate. The loop below will
+ * correct for any error in this estimate. */
+ metonicCycle = (inputDay + 310) / 6940;
+
+ /* Calculate the time of the starting molad for this metonic cycle. */
+ MoladOfMetonicCycle(metonicCycle, &moladDay, &moladHalakim);
+
+ /* If the above was an under estimate, increment the cycle number until
+ * the correct one is found. For modern dates this loop is about 98.6%
+ * likely to not execute, even once, because the above estimate is
+ * really quite close. */
+ while (moladDay < inputDay - 6940 + 310) {
+ metonicCycle++;
+ moladHalakim += HALAKIM_PER_METONIC_CYCLE;
+ moladDay += moladHalakim / HALAKIM_PER_DAY;
+ moladHalakim = moladHalakim % HALAKIM_PER_DAY;
+ }
+
+ /* Find the molad of Tishri closest to this date. */
+ for (metonicYear = 0; metonicYear < 18; metonicYear++) {
+ if (moladDay > inputDay - 74) {
+ break;
+ }
+ moladHalakim += HALAKIM_PER_LUNAR_CYCLE * monthsPerYear[metonicYear];
+ moladDay += moladHalakim / HALAKIM_PER_DAY;
+ moladHalakim = moladHalakim % HALAKIM_PER_DAY;
+ }
+
+ *pMetonicCycle = metonicCycle;
+ *pMetonicYear = metonicYear;
+ *pMoladDay = moladDay;
+ *pMoladHalakim = moladHalakim;
+}
+
+/************************************************************************
+ * Given a year, find the number of the first day of that year and the date
+ * and time of the starting molad.
+ */
+static void
+FindStartOfYear(
+ int year,
+ int *pMetonicCycle,
+ int *pMetonicYear,
+ long int *pMoladDay,
+ long int *pMoladHalakim,
+ int *pTishri1)
+{
+ *pMetonicCycle = (year - 1) / 19;
+ *pMetonicYear = (year - 1) % 19;
+ MoladOfMetonicCycle(*pMetonicCycle, pMoladDay, pMoladHalakim);
+
+ *pMoladHalakim += HALAKIM_PER_LUNAR_CYCLE * yearOffset[*pMetonicYear];
+ *pMoladDay += *pMoladHalakim / HALAKIM_PER_DAY;
+ *pMoladHalakim = *pMoladHalakim % HALAKIM_PER_DAY;
+
+ *pTishri1 = Tishri1(*pMetonicYear, *pMoladDay, *pMoladHalakim);
+}
+
+/************************************************************************
+ * Given a serial day number (SDN), find the corresponding year, month and
+ * day in the Jewish calendar. The three output values will always be
+ * modified. If the input SDN is before the first day of year 1, they will
+ * all be set to zero, otherwise *pYear will be > 0; *pMonth will be in the
+ * range 1 to 13 inclusive; *pDay will be in the range 1 to 30 inclusive.
+ */
+void
+SdnToJewish(
+ long int sdn,
+ int *pYear,
+ int *pMonth,
+ int *pDay)
+{
+ long int inputDay;
+ long int day;
+ long int halakim;
+ int metonicCycle;
+ int metonicYear;
+ int tishri1;
+ int tishri1After;
+ int yearLength;
+
+ if (sdn <= SDN_OFFSET) {
+ *pYear = 0;
+ *pMonth = 0;
+ *pDay = 0;
+ return;
+ }
+ inputDay = sdn - SDN_OFFSET;
+
+ FindTishriMolad(inputDay, &metonicCycle, &metonicYear, &day, &halakim);
+ tishri1 = Tishri1(metonicYear, day, halakim);
+
+ if (inputDay >= tishri1) {
+ /* It found Tishri 1 at the start of the year. */
+ *pYear = metonicCycle * 19 + metonicYear + 1;
+ if (inputDay < tishri1 + 59) {
+ if (inputDay < tishri1 + 30) {
+ *pMonth = 1;
+ *pDay = inputDay - tishri1 + 1;
+ } else {
+ *pMonth = 2;
+ *pDay = inputDay - tishri1 - 29;
+ }
+ return;
+ }
+
+ /* We need the length of the year to figure this out, so find
+ * Tishri 1 of the next year. */
+ halakim += HALAKIM_PER_LUNAR_CYCLE * monthsPerYear[metonicYear];
+ day += halakim / HALAKIM_PER_DAY;
+ halakim = halakim % HALAKIM_PER_DAY;
+ tishri1After = Tishri1((metonicYear + 1) % 19, day, halakim);
+ } else {
+ /* It found Tishri 1 at the end of the year. */
+ *pYear = metonicCycle * 19 + metonicYear;
+ if (inputDay >= tishri1 - 177) {
+ /* It is one of the last 6 months of the year. */
+ if (inputDay > tishri1 - 30) {
+ *pMonth = 13;
+ *pDay = inputDay - tishri1 + 30;
+ } else if (inputDay > tishri1 - 60) {
+ *pMonth = 12;
+ *pDay = inputDay - tishri1 + 60;
+ } else if (inputDay > tishri1 - 89) {
+ *pMonth = 11;
+ *pDay = inputDay - tishri1 + 89;
+ } else if (inputDay > tishri1 - 119) {
+ *pMonth = 10;
+ *pDay = inputDay - tishri1 + 119;
+ } else if (inputDay > tishri1 - 148) {
+ *pMonth = 9;
+ *pDay = inputDay - tishri1 + 148;
+ } else {
+ *pMonth = 8;
+ *pDay = inputDay - tishri1 + 178;
+ }
+ return;
+ } else {
+ if (monthsPerYear[(*pYear - 1) % 19] == 13) {
+ *pMonth = 7;
+ *pDay = inputDay - tishri1 + 207;
+ if (*pDay > 0) return;
+ (*pMonth)--;
+ (*pDay) += 30;
+ if (*pDay > 0) return;
+ (*pMonth)--;
+ (*pDay) += 30;
+ } else {
+ *pMonth = 6;
+ *pDay = inputDay - tishri1 + 207;
+ if (*pDay > 0) return;
+ (*pMonth)--;
+ (*pDay) += 30;
+ }
+ if (*pDay > 0) return;
+ (*pMonth)--;
+ (*pDay) += 29;
+ if (*pDay > 0) return;
+
+ /* We need the length of the year to figure this out, so find
+ * Tishri 1 of this year. */
+ tishri1After = tishri1;
+ FindTishriMolad(day - 365,
+ &metonicCycle, &metonicYear, &day, &halakim);
+ tishri1 = Tishri1(metonicYear, day, halakim);
+ }
+ }
+
+ yearLength = tishri1After - tishri1;
+ day = inputDay - tishri1 - 29;
+ if (yearLength == 355 || yearLength == 385) {
+ /* Heshvan has 30 days */
+ if (day <= 30) {
+ *pMonth = 2;
+ *pDay = day;
+ return;
+ }
+ day -= 30;
+ } else {
+ /* Heshvan has 29 days */
+ if (day <= 29) {
+ *pMonth = 2;
+ *pDay = day;
+ return;
+ }
+ day -= 29;
+ }
+
+ /* It has to be Kislev. */
+ *pMonth = 3;
+ *pDay = day;
+}
+
+/************************************************************************
+ * Given a year, month and day in the Jewish calendar, find the
+ * corresponding serial day number (SDN). Zero is returned when the input
+ * date is detected as invalid. The return value will be > 0 for all valid
+ * dates, but there are some invalid dates that will return a positive
+ * value. To verify that a date is valid, convert it to SDN and then back
+ * and compare with the original.
+ */
+long int
+JewishToSdn(
+ int year,
+ int month,
+ int day)
+{
+ long int sdn;
+ int metonicCycle;
+ int metonicYear;
+ int tishri1;
+ int tishri1After;
+ long int moladDay;
+ long int moladHalakim;
+ int yearLength;
+ int lengthOfAdarIAndII;
+
+ if (year <= 0 || day <= 0 || day > 30) {
+ return(0);
+ }
+
+ switch (month) {
+ case 1:
+ case 2:
+ /* It is Tishri or Heshvan - don't need the year length. */
+ FindStartOfYear(year, &metonicCycle, &metonicYear,
+ &moladDay, &moladHalakim, &tishri1);
+ if (month == 1) {
+ sdn = tishri1 + day - 1;
+ } else {
+ sdn = tishri1 + day + 29;
+ }
+ break;
+
+ case 3:
+ /* It is Kislev - must find the year length. */
+
+ /* Find the start of the year. */
+ FindStartOfYear(year, &metonicCycle, &metonicYear,
+ &moladDay, &moladHalakim, &tishri1);
+
+ /* Find the end of the year. */
+ moladHalakim += HALAKIM_PER_LUNAR_CYCLE * monthsPerYear[metonicYear];
+ moladDay += moladHalakim / HALAKIM_PER_DAY;
+ moladHalakim = moladHalakim % HALAKIM_PER_DAY;
+ tishri1After = Tishri1((metonicYear + 1) % 19, moladDay, moladHalakim);
+
+ yearLength = tishri1After - tishri1;
+
+ if (yearLength == 355 || yearLength == 385) {
+ sdn = tishri1 + day + 59;
+ } else {
+ sdn = tishri1 + day + 58;
+ }
+ break;
+
+ case 4:
+ case 5:
+ case 6:
+ /* It is Tevet, Shevat or Adar I - don't need the year length. */
+
+ FindStartOfYear(year + 1, &metonicCycle, &metonicYear,
+ &moladDay, &moladHalakim, &tishri1After);
+
+ if (monthsPerYear[(year - 1) % 19] == 12) {
+ lengthOfAdarIAndII = 29;
+ } else {
+ lengthOfAdarIAndII = 59;
+ }
+
+ if (month == 4) {
+ sdn = tishri1After + day - lengthOfAdarIAndII - 237;
+ } else if (month == 5) {
+ sdn = tishri1After + day - lengthOfAdarIAndII - 208;
+ } else {
+ sdn = tishri1After + day - lengthOfAdarIAndII - 178;
+ }
+ break;
+
+ default:
+ /* It is Adar II or later - don't need the year length. */
+ FindStartOfYear(year + 1, &metonicCycle, &metonicYear,
+ &moladDay, &moladHalakim, &tishri1After);
+
+ switch (month) {
+ case 7:
+ sdn = tishri1After + day - 207;
+ break;
+ case 8:
+ sdn = tishri1After + day - 178;
+ break;
+ case 9:
+ sdn = tishri1After + day - 148;
+ break;
+ case 10:
+ sdn = tishri1After + day - 119;
+ break;
+ case 11:
+ sdn = tishri1After + day - 89;
+ break;
+ case 12:
+ sdn = tishri1After + day - 60;
+ break;
+ case 13:
+ sdn = tishri1After + day - 30;
+ break;
+ default:
+ return(0);
+ }
+ }
+ return(sdn + SDN_OFFSET);
+}
projects / gedcom-parse.git / blobdiff