--- /dev/null
+dnl Autoconf/automake macros for the Gedcom parser library
+dnl Peter Verthez
+dnl partly stolen from Manish Singh
+dnl stolen back from Frank Belew
+dnl stolen from Manish Singh
+dnl Shamelessly stolen from Owen Taylor
+dnl
+dnl $Id$
+dnl $Name$
+
+dnl AM_PATH_GEDCOM_PARSER([MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for gedcom-parse, and define GEDCOM_CFLAGS and GEDCOM_LIBS
+dnl
+AC_DEFUN(AM_PATH_GEDCOM_PARSER, [
+AC_ARG_WITH(gedcom-prefix,[ --with-gedcom-prefix=PFX Prefix where the Gedcom parser library is installed (optional)],
+ gedcom_config_prefix="$withval", gedcom_config_prefix="")
+AC_ARG_WITH(gedcom-exec-prefix,[ --with-gedcom-exec-prefix=PFX Exec prefix where the Gedcom parser library is installed (optional)],
+ gedcom_config_exec_prefix="$withval", gedcom_config_exec_prefix="")
+AC_ARG_ENABLE(gedcomtest, [ --disable-gedcomtest Do not try to compile and run a test program with the Gedcom parser library],
+ , enable_gedcomtest=yes)
+
+ for module in . $4
+ do
+ case "$module" in
+ gom)
+ gedcom_config_args="$gedcom_config_args gom"
+ ;;
+ esac
+ done
+
+ if test x$gedcom_config_exec_prefix != x ; then
+ gedcom_config_args="$gedcom_config_args --exec-prefix=$gedcom_config_exec_prefix"
+ if test x${GEDCOM_CONFIG+set} != xset ; then
+ GEDCOM_CONFIG=$gedcom_config_exec_prefix/bin/gedcom-config
+ fi
+ fi
+ if test x$gedcom_config_prefix != x ; then
+ gedcom_config_args="$gedcom_config_args --prefix=$gedcom_config_prefix"
+ if test x${GEDCOM_CONFIG+set} != xset ; then
+ GEDCOM_CONFIG=$gedcom_config_prefix/bin/gedcom-config
+ fi
+ fi
+
+ AC_PATH_PROG(GEDCOM_CONFIG, gedcom-config, no)
+ min_gedcom_version=ifelse([$1], ,0.20.0,$1)
+ AC_MSG_CHECKING(for Gedcom parser library - version >= $min_gedcom_version)
+ no_gedcom=""
+ if test "$GEDCOM_CONFIG" = "no" ; then
+ no_gedcom=yes
+ else
+ GEDCOM_CFLAGS=`$GEDCOM_CONFIG $gedcom_config_args --cflags`
+ GEDCOM_LIBS=`$GEDCOM_CONFIG $gedcom_config_args --libs`
+ gedcom_config_major_vers=`$GEDCOM_CONFIG $gedcom_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ gedcom_config_minor_vers=`$GEDCOM_CONFIG $gedcom_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ gedcom_config_patch_vers=`$GEDCOM_CONFIG $gedcom_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+ if test "x$enable_gedcomtest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GEDCOM_CFLAGS"
+ LIBS="$GEDCOM_LIBS $LIBS"
+dnl
+dnl Now check if the installed Gedcom parser is sufficiently new. (Also sanity
+dnl checks the results of gedcom-config to some extent
+dnl
+ rm -f conf.gedcomtest
+ AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "gedcom.h"
+
+char*
+my_strdup (char *str)
+{
+ char *new_str;
+
+ if (str)
+ {
+ new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
+ strcpy (new_str, str);
+ }
+ else
+ new_str = NULL;
+
+ return new_str;
+}
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.gedcomtest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = my_strdup("$min_gedcom_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gedcom_version");
+ exit(1);
+ }
+
+ if (0) {
+ }
+#ifdef GEDCOM_PARSE_VERSION_PATCH
+ else if ((GEDCOM_PARSE_VERSION_MAJOR != $gedcom_config_major_vers) ||
+ (GEDCOM_PARSE_VERSION_MINOR != $gedcom_config_minor_vers) ||
+ (GEDCOM_PARSE_VERSION_PATCH != $gedcom_config_patch_vers))
+ {
+ printf("\n*** 'gedcom-config --version' returned %d.%d.%d, but gedcom-parse (%d.%d.%d)\n",
+ $gedcom_config_major_vers, $gedcom_config_minor_vers, $gedcom_config_patch_vers,
+ GEDCOM_PARSE_VERSION_MAJOR, GEDCOM_PARSE_VERSION_MINOR,
+ GEDCOM_PARSE_VERSION_PATCH);
+ printf ("*** was found! If gedcom-config was correct, then it is best to remove the\n");
+ printf ("*** old version of gedcom-parse. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If gedcom-config was wrong, set the environment variable GEDCOM_CONFIG\n");
+ printf("*** to point to the correct copy of gedcom-config, and remove the file config.cache\n");
+ printf("*** before re-running configure\n");
+ return 1;
+ }
+
+ else if (gedcom_check_version(major, minor, micro)) {
+ return 0;
+ }
+#else
+ else if (GEDCOM_PARSE_VERSION >= major * 1000 + minor) {
+ return 0;
+ }
+#endif
+
+ else
+ {
+ printf("\n*** An old version of gedcom-parse (%d.%d.%d) was found.\n",
+ GEDCOM_PARSE_VERSION_MAJOR, GEDCOM_PARSE_VERSION_MINOR,
+ GEDCOM_PARSE_VERSION_PATCH);
+ printf("*** You need a version of gedcom-parse newer than %d.%d.%d. The latest version\n",
+ major, minor, micro);
+ printf("*** of gedcom-parse is always available from the following location:\n");
+ printf("*** https://sourceforge.net/projects/gedcom-parse\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the gedcom-config shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of gedcom-parse, but you can also set the GEDCOM_CONFIG environment to\n");
+ printf("*** point to the correct copy of gedcom-config. (In this case, you will have\n");
+ printf("*** to modify your LD_LIBRARY_PATH environment var., or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ return 1;
+ }
+}
+],, no_gedcom=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_gedcom" = x ; then
+ AC_MSG_RESULT(yes)
+ ifelse([$2], , :, [$2])
+ else
+ AC_MSG_RESULT(no)
+ if test "$GEDCOM_CONFIG" = "no" ; then
+ echo "*** The gedcom-config script installed by gedcom-parse could not be found"
+ echo "*** If gedcom-parse was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the GEDCOM_CONFIG environment variable to the"
+ echo "*** full path to gedcom-config."
+ echo "*** It could also be that your version of gedcom-parse is too old."
+ echo "*** You need at least version $min_gedcom_version. The latest version"
+ echo "*** of gedcom-parse can always be found at this location:"
+ echo "*** https://sourceforge.net/projects/gedcom-parse"
+ else
+ if test -f conf.gedcomtest ; then
+ :
+ else
+ echo "*** Could not run gedcom-parse test program, checking why..."
+ CFLAGS="$CFLAGS $GEDCOM_CFLAGS"
+ LIBS="$LIBS $GEDCOM_LIBS"
+ AC_TRY_LINK([
+#include <stdio.h>
+#include "gedcom.h"
+], [ return ((GEDCOM_PARSE_VERSION_MAJOR) || (GEDCOM_PARSE_VERSION_MINOR) || (GEDCOM_PARSE_VERSION_PATCH)); ],
+ [ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding gedcom-parse or finding the wrong"
+ echo "*** version of gedcom-parse. If it is not finding gedcom-parse, you'll need"
+ echo "*** to set your LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf"
+ echo "*** to point to the installed location Also, make sure you have run ldconfig"
+ echo "*** if that is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+ echo "***"],
+ [ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means gedcom-parse was incorrectly"
+ echo "*** installed or that you have moved gedcom-parse since it was installed."
+ echo "*** In the latter case, you may want to edit the gedcom-config script: $GEDCOM_CONFIG" ])
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GEDCOM_CFLAGS=""
+ GEDCOM_LIBS=""
+ ifelse([$3], , :, [$3])
+ fi
+ AC_SUBST(GEDCOM_CFLAGS)
+ AC_SUBST(GEDCOM_LIBS)
+ rm -f conf.gedcomtest
+])
projects / familia.git / commitdiff