+++ /dev/null
-dnl Autoconf/automake macros for the Gedcom parser library
-dnl Peter Verthez
-dnl partly stolen from Manish Singh
-dnl stolen back from Frank Belew
-dnl stolen from Manish Singh
-dnl Shamelessly stolen from Owen Taylor
-dnl
-dnl $Id$
-dnl $Name$
-
-dnl AM_PATH_GEDCOM_PARSER([MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for gedcom-parse, and define GEDCOM_CFLAGS and GEDCOM_LIBS
-dnl
-AC_DEFUN(AM_PATH_GEDCOM_PARSER, [
-AC_ARG_WITH(gedcom-prefix,[ --with-gedcom-prefix=PFX Prefix where the Gedcom parser library is installed (optional)],
- gedcom_config_prefix="$withval", gedcom_config_prefix="")
-AC_ARG_WITH(gedcom-exec-prefix,[ --with-gedcom-exec-prefix=PFX Exec prefix where the Gedcom parser library is installed (optional)],
- gedcom_config_exec_prefix="$withval", gedcom_config_exec_prefix="")
-AC_ARG_ENABLE(gedcomtest, [ --disable-gedcomtest Do not try to compile and run a test program with the Gedcom parser library],
- , enable_gedcomtest=yes)
-
- for module in . $4
- do
- case "$module" in
- gom)
- gedcom_config_args="$gedcom_config_args gom"
- ;;
- esac
- done
-
- if test x$gedcom_config_exec_prefix != x ; then
- gedcom_config_args="$gedcom_config_args --exec-prefix=$gedcom_config_exec_prefix"
- if test x${GEDCOM_CONFIG+set} != xset ; then
- GEDCOM_CONFIG=$gedcom_config_exec_prefix/bin/gedcom-config
- fi
- fi
- if test x$gedcom_config_prefix != x ; then
- gedcom_config_args="$gedcom_config_args --prefix=$gedcom_config_prefix"
- if test x${GEDCOM_CONFIG+set} != xset ; then
- GEDCOM_CONFIG=$gedcom_config_prefix/bin/gedcom-config
- fi
- fi
-
- AC_PATH_PROG(GEDCOM_CONFIG, gedcom-config, no)
- min_gedcom_version=ifelse([$1], ,0.20.0,$1)
- AC_MSG_CHECKING(for Gedcom parser library - version >= $min_gedcom_version)
- no_gedcom=""
- if test "$GEDCOM_CONFIG" = "no" ; then
- no_gedcom=yes
- else
- GEDCOM_CFLAGS=`$GEDCOM_CONFIG $gedcom_config_args --cflags`
- GEDCOM_LIBS=`$GEDCOM_CONFIG $gedcom_config_args --libs`
- gedcom_config_major_vers=`$GEDCOM_CONFIG $gedcom_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- gedcom_config_minor_vers=`$GEDCOM_CONFIG $gedcom_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- gedcom_config_patch_vers=`$GEDCOM_CONFIG $gedcom_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_gedcomtest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $GEDCOM_CFLAGS"
- LIBS="$GEDCOM_LIBS $LIBS"
-dnl
-dnl Now check if the installed Gedcom parser is sufficiently new. (Also sanity
-dnl checks the results of gedcom-config to some extent
-dnl
- rm -f conf.gedcomtest
- AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "gedcom.h"
-
-char*
-my_strdup (char *str)
-{
- char *new_str;
-
- if (str)
- {
- new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
- strcpy (new_str, str);
- }
- else
- new_str = NULL;
-
- return new_str;
-}
-
-int
-main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.gedcomtest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = my_strdup("$min_gedcom_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_gedcom_version");
- exit(1);
- }
-
- if (0) {
- }
-#ifdef GEDCOM_PARSE_VERSION_PATCH
- else if ((GEDCOM_PARSE_VERSION_MAJOR != $gedcom_config_major_vers) ||
- (GEDCOM_PARSE_VERSION_MINOR != $gedcom_config_minor_vers) ||
- (GEDCOM_PARSE_VERSION_PATCH != $gedcom_config_patch_vers))
- {
- printf("\n*** 'gedcom-config --version' returned %d.%d.%d, but gedcom-parse (%d.%d.%d)\n",
- $gedcom_config_major_vers, $gedcom_config_minor_vers, $gedcom_config_patch_vers,
- GEDCOM_PARSE_VERSION_MAJOR, GEDCOM_PARSE_VERSION_MINOR,
- GEDCOM_PARSE_VERSION_PATCH);
- printf ("*** was found! If gedcom-config was correct, then it is best to remove the\n");
- printf ("*** old version of gedcom-parse. You may also be able to fix the error\n");
- printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
- printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
- printf("*** required on your system.\n");
- printf("*** If gedcom-config was wrong, set the environment variable GEDCOM_CONFIG\n");
- printf("*** to point to the correct copy of gedcom-config, and remove the file config.cache\n");
- printf("*** before re-running configure\n");
- return 1;
- }
-
- else if (gedcom_check_version(major, minor, micro)) {
- return 0;
- }
-#else
- else if (GEDCOM_PARSE_VERSION >= major * 1000 + minor) {
- return 0;
- }
-#endif
-
- else
- {
- printf("\n*** An old version of gedcom-parse (%d.%d.%d) was found.\n",
- GEDCOM_PARSE_VERSION_MAJOR, GEDCOM_PARSE_VERSION_MINOR,
- GEDCOM_PARSE_VERSION_PATCH);
- printf("*** You need a version of gedcom-parse newer than %d.%d.%d. The latest version\n",
- major, minor, micro);
- printf("*** of gedcom-parse is always available from the following location:\n");
- printf("*** https://sourceforge.net/projects/gedcom-parse\n");
- printf("***\n");
- printf("*** If you have already installed a sufficiently new version, this error\n");
- printf("*** probably means that the wrong copy of the gedcom-config shell script is\n");
- printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of gedcom-parse, but you can also set the GEDCOM_CONFIG environment to\n");
- printf("*** point to the correct copy of gedcom-config. (In this case, you will have\n");
- printf("*** to modify your LD_LIBRARY_PATH environment var., or edit /etc/ld.so.conf\n");
- printf("*** so that the correct libraries are found at run-time))\n");
- return 1;
- }
-}
-],, no_gedcom=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_gedcom" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$GEDCOM_CONFIG" = "no" ; then
- echo "*** The gedcom-config script installed by gedcom-parse could not be found"
- echo "*** If gedcom-parse was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GEDCOM_CONFIG environment variable to the"
- echo "*** full path to gedcom-config."
- echo "*** It could also be that your version of gedcom-parse is too old."
- echo "*** You need at least version $min_gedcom_version. The latest version"
- echo "*** of gedcom-parse can always be found at this location:"
- echo "*** https://sourceforge.net/projects/gedcom-parse"
- else
- if test -f conf.gedcomtest ; then
- :
- else
- echo "*** Could not run gedcom-parse test program, checking why..."
- CFLAGS="$CFLAGS $GEDCOM_CFLAGS"
- LIBS="$LIBS $GEDCOM_LIBS"
- AC_TRY_LINK([
-#include <stdio.h>
-#include "gedcom.h"
-], [ return ((GEDCOM_PARSE_VERSION_MAJOR) || (GEDCOM_PARSE_VERSION_MINOR) || (GEDCOM_PARSE_VERSION_PATCH)); ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding gedcom-parse or finding the wrong"
- echo "*** version of gedcom-parse. If it is not finding gedcom-parse, you'll need"
- echo "*** to set your LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf"
- echo "*** to point to the installed location Also, make sure you have run ldconfig"
- echo "*** if that is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
- echo "***"],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means gedcom-parse was incorrectly"
- echo "*** installed or that you have moved gedcom-parse since it was installed."
- echo "*** In the latter case, you may want to edit the gedcom-config script: $GEDCOM_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- GEDCOM_CFLAGS=""
- GEDCOM_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(GEDCOM_CFLAGS)
- AC_SUBST(GEDCOM_LIBS)
- rm -f conf.gedcomtest
-])
projects / familia.git / commitdiff